Types of Car Lights (What They are and When to Use Them)

Many automobile brands in the world have sought to produce distinctive cars of high quality and power, not only in terms of performance; But also in terms of design, as the modern design and advanced elements help facilitate the driving experience and enhance efficiency while greatly assisting the driver in driving in various environmental conditions, thus improving traffic safety on the roads.

Perhaps the most prominent feature that distinguishes the exterior design of cars is the shape and design of lighting, which is now available in several types, but its goal is one and the same, which is to help the driver drive better. To learn about it, we have presented below an article that highlights the details and information regarding the types of lighting and the benefit of each of them in enhancing performance and efficiency. Leadership.

Car lights and headlights: what they are and when to use them?

With the development of the automobile industry, the manufacture of its lamps has also developed, and thus, when you pass through any street or road crowded with cars, the design of the cars must catch your eye, especially those that have a group of different lamps with high and intense illumination, which you may not find in another car!

It should be noted that most modern cars have 9 different lamps, and some of them have multiple uses. Lights are very important for road safety. Below, we will present to you the types of lamps or lighting in the car.

Daytime running lights

These lamps or lights are located in both the front and rear of any modern car, and they turn on automatically when the engine is started, which means that there is no need to turn them on personally, and they are called “Daylight running lights.”

Front lighting

Front lighting in all modern cars comes in two types, as follows:

Low beam headlights

This “low beam/dipped headlights” may be the most important of all lights, as it is the headlight that you usually turn on in the dark or in poor visibility due to rain or snow. The low beam illuminates approximately 50 to 75 meters in front of your car without… Obstructing oncoming traffic, once the low beam is turned on, the taillights also turn on automatically.

High beam headlights

These full-beam headlights are called “Full/High Beam Headlights,” and they work just like low-beam headlights. They help you see the road in the dark, but they differ in that they provide intense light distribution with a lot of glare.

It is preferable for the driver to use it only when it is difficult for others to see his car, especially when there are no other cars on the road, or if you are at least 150 meters away from oncoming traffic and need full lighting to see the road.

But it is important to turn off full lighting in certain situations to avoid the risk of blinding or distracting oncoming traffic, including cars approaching you, even if they are on the other side of the highway barrier; In addition to fog conditions, because the reflection of light may hinder you from seeing cars, and also when driving on curves, on hills, and at intersections, where there is no way to know if another car is coming towards you.


Taillights come in the form of red lights located at the back of the car, which turn on automatically whenever the low-beam headlights are on, and also turn on at the same time as the car’s brake lights.

Brake lights

Brake lights are located on the side of the taillights. They indicate to drivers that the driver is slowing down or will stop. Since they are only activated when the brakes are pressed, there is no need to worry about misusing them. However, you should make sure to maintain them and regularly check their condition. These lamps are working properly.

Signal lights/indicators

There are also Turn Signal Lights, known as turn signals, indicators, or flashers, and they are located in the front and back of the car. Turn Signal Lights can also be found on the side mirrors, and they are used to let other drivers know that you are planning to turn and will likely need to slow down. To turn.

Hazard warning lights

Signal lights are also used as hazard lights, known as flashers or hazard warning lights. When the hazard lights are on, they flash to warn other drivers of traffic problems or tight spaces between cars.

and for example; They are lit to warn other drivers of a danger on the road in front of you, or when you stop and cause a temporary traffic obstruction, or when your car breaks down while you are in the middle of the road. On the other hand, they should not be used when you stop temporarily on the side of the road or in any other place. .

Fog lights

Fog lights with a unique, flat, wide beam are usually placed at the front of the car near the bumper and headlights, so that the shape of the beam emanating from the fog light penetrates to illuminate the road surface. The design of this beam avoids light being reflected backwards, thus The light will not shine into the driver’s eyes.

Cars also have at least one rear fog lamp to help other drivers spot your car. Fog lights are so powerful that they can distract other drivers, so they should only be used during foggy or snowy conditions (but not rain) when the lights are on. Regular forefoot is ineffective.

Interior driving lights

These “interior lights” are known as cockpit interior lights, and are useful for checking a map or directions or finding something in the dark. They are not recommended for long periods of time, nor should they be used while driving as they can distract the driver.

How to use car lights depending on the different times of the day?

Learn how to use these lights based on different times of the day, as follows:

During the day
Visibility during the day and in normal weather conditions is usually good, which means you do not need to use any additional lights. However, many modern cars use daytime running lights to improve your visibility to other road users.

Immediately after sunrise or immediately before sunset
Visibility begins to decrease after sunrise and just before sunset, which is why it is a good idea to use low beams at these times of the day.

Driving at night

Obviously, driving at night is more difficult and requires more concentration than driving during the day, and for this reason; It is important to balance your need for light to improve your visibility with the needs of other road users. In other words, you should use low-beam headlights when other cars are nearby, and high-beam headlights when you are at least 150 meters away from other cars.

Thus, we have learned about the multiple types of lighting found in most cars, and how to use them. It should be noted that with the era of development in which we live, some brands provide other types of lighting, and thus they are an additional option for the driver that he can add to his car.

Back to top button